More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts > Super 7 Parts

myford lathe parts  > Super 7 Parts

Tool Clamp Stud Assembly [S7TCSA] Tool Clamp Stud Assembly [S7TCSA]
Tool clamp stud assembly used to retain the tool post on all 7-Series, 10-Series and 254-Series lathes
Myford Part No's: 75/1406; A2806; 75/1410; 75/1412
...
£14.95
Adjusting Screws [A2123] Adjusting Screws [A2123]
Myford Part No: A2123Screws that fit into the countershaft to adjust the headstock belt tensionQuantity: pack of 2Condition: NewApplication: ML7; ML-7R; Super 7...
£5.45
Guard Hinge Screws [A2024] Guard Hinge Screws [A2024]
5/16" B.S.F hinge screws for Super 7 change gear guard; Super 7 motor drive belt guard & quick change gearbox end cover
Myford Part No. A2024
Quantity...
£4.25
Thrust Collar - Leadscrew [75-1115-1] Thrust Collar - Leadscrew [75-1115-1]
Myford Part No: 75/1115/1Thrust collar which fits on the leadscrew to bear against the R.H leadscrew support bracketApplication: ML7; ML-7R; Super 7Category: Ne...
£2.95
7/16 7/16" BSF Simmonds Nut [7F16BSFNKP]
Locking nut used at the R.H end of the leadscrew
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 7/16" B.S.F
Finish: Bright zinc pla...
£1.95
Apron Screws [S7A_Screws] Apron Screws [S7A_Screws]
Set of 5 Imperial screws used to fasten the apron to the saddle on Series 7 lathes with alloy and cast iron aprons. (Only 3 are used on early ML7's and 4 on som...
£4.50
2 BA Oil Nipple [33/072] 2 BA Oil Nipple [33/072]
low in stock! Sold
Replacement oil nipples used throughout Myford lathesFlat front face and spherical rear form permits use with all types of push fit oil guns These nipples have ...
£7.50
Woodruff Keys [404WK] Woodruff Keys [404WK]
Myford reference: Woodruf Key No. 404Used throughout Myford lathesSize: ½" x ⅛"Quantity: Pack of 5Application: ML7; ML-7R; ML10; Super 7Category: New_Item...
£3.95
Tool Clamp [74/1409/1_U] Tool Clamp [74/1409/1_U]
Standard tool clamp to suit all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 74/1409/1
Condition: 9/10 to 10/10
Application: Super 7; ML7-...
£9.95
Spring [A2806] Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
£2.95
Cam & Lever [A1837_1_4] Cam & Lever [A1837_1_4]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
£12.95
Raiser Block Stud Set [RBSS] Raiser Block Stud Set [RBSS]
low in stock! Sold
Set of 4 studs used to clamp the lathe bed to the cabinet when using raiser blocks. Can also be used when mounting lathe on a timber bench. Studs are 4" long an...
£6.95
Raiser Block Levelling Inserts [RBIB4] Raiser Block Levelling Inserts [RBIB4]
low in stock! Sold
Set of 4 insert bushes for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7;...
£8.95
Raiser Block Levelling Insert [RBIB1] Raiser Block Levelling Insert [RBIB1]
Single insert bush for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7; ML7...
£2.50
Raiser Block Stud Assemblies [RBSA4] Raiser Block Stud Assemblies [RBSA4]
low in stock! Sold
Set of 4 stud assemblies used to clamp the lathe bed to the cabinet when using raiser blocks.
Condition: 9/10 - rubber seals are aged
Application: Super 7...
£19.95
Headstock Spindle [A1992_k1] Headstock Spindle [A1992_k1]
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: Good used - 8/10 to 9/10. There is a small ding on the register - Picture 2
Appli...
£49.95
« previous 1 2 3 ... 4 5 next »