basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


New_Items

3/8 3/8" BSF Simmonds Nuts [3F8BSFNKP_2]
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 3/8" B.S.F
Finish: Bright zinc plate
Unit Quantity: Pack of 2Category: New_Items
...
1.20
ML7 Motor Drive Belt [ML7MDB] ML7 Motor Drive Belt [ML7MDB]
Standard Vee-Belt which drives from the motor pulley to the countershaft drive pulley.High quality belt from a major supplierApplication: ML7; ML7 Tri-LevaCateg...
5.25
ML7 Headstock Drive Belt [ML7HDB] ML7 Headstock Drive Belt [ML7HDB]
Standard Vee-Belt which drives from the 3-step pulley on the countershaft to the headstock spindle drive pulley.This belt is also suitable for ML7 lathes fitted...
5.25
Super 7 / ML7R Headstock Drive Belt [S7HDB] Super 7 / ML7R Headstock Drive Belt [S7HDB]
Standard Vee-Belt which drives from the 4-step pulley on the countershaft to the headstock spindle drive pulley.High quality belt from a major supplierApplicati...
5.25
Super 7 / ML7R Motor Drive Belt [S7MDB] Super 7 / ML7R Motor Drive Belt [S7MDB]
Standard Vee-Belt which drives from the 2-step pulley on the motor to the countershaft drive pulley.High quality belt from a major supplierApplication: Super 7;...
5.25
Sheet Metal & Wire Gauge [WG_SS] Sheet Metal & Wire Gauge [WG_SS]
low in stock! Sold
Sheet Metal & Wire Gauge Made from heavy gauge hardened stainless steel.These gauges are designed for measuring metal sheet and wire in the size range from ...
5.75
MT1 Drill Chuck Arbor [Stk. No. GAT-16] MT1 Drill Chuck Arbor [Stk. No. GAT-16]
MT1 Drill Chuck Arbor Morse Taper 1MT arbor with tapered end to suit chucks with a Jacobs 6JT fitting.Manufacturer: GrozCondition: N.O.S - slight surface staini...
4.75
R8 Chuck Arbor [Stk. No. R8-6] R8 Chuck Arbor [Stk. No. R8-6]
R8 Chuck ArborBridgeport R8 type arbor with tapered end to suit chucks with a Jacobs 6JT fitting.Manufacturer: GrozCondition: N.O.S - slight surface stainingCat...
4.95
Adjusting Screws [A2123] Adjusting Screws [A2123]
Myford Part No: A2123Screws that fit into the countershaft to adjust the headstock belt tensionQuantity: pack of 2Condition: NewApplication: ML7; ML-7R; Super 7...
5.95
Knob  PCF [A9208] Knob PCF [A9208]
Myford Part No: A9208Knob operating spindleControl knob to operate the power cross-feedCondition: NewApplication: Super 7Category: New_Items...
4.50
Clamp Screw [A2050/A2051] Clamp Screw [A2050/A2051]
Myford Part No: A2050 & A2051Clamp screw and head used to lock the motor platformCondition: NewApplication: Super 7; ML-7RCategory: New_Items...
4.50
Thrust Collar - Leadscrew [Stk. No. 75-1115-1] Thrust Collar - Leadscrew [Stk. No. 75-1115-1]
low in stock! Sold
Myford Part No: 75/1115/1Thrust collar which fits on the leadscrew to bear against the R.H leadscrew support bracketCondition: NewApplication: ML7; ML-7R; Super...
1.50
3/8 3/8" BSF Simmonds Nuts [3F8BSFNKP]
Locking nuts to fit the tailstock clamping stud and to secure the tailstock handwheel
Thread: 3/8" B.S.F
Finish: Bright zinc plate
Unit Quantity: Pack ...
1.20
7/16 7/16" BSF Simmonds Nut [7F16BSFNKP]
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 7/16" B.S.F
Finish: Bright zinc plate
Unit Quantity: 1Category: New_Items
...
0.70
7/16 7/16" BSF Simmonds Nut [7F16BSFNKP]
Locking nut used at the R.H end of the leadscrew
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 7/16" B.S.F
Finish: Bright zinc pla...
0.70
M10 Grease Nipple [Stk. No. HMM10150] M10 Grease Nipple [Stk. No. HMM10150]
Straight hydraulic grease nippleManufactured to B.S. 1486Thread Size: M10 x 1.5Manufacturer: LumaticQuantity: Pack of 5Category: New_Items ...
2.95
« previous 1 next »