basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts > Super 7 Parts

myford lathe parts  > Super 7 Parts

Bedway Plate [IHBP] Bedway Plate [IHBP]
Myford plate for rivetting to 7-Series lathes with induction hardened bedways
New old stock...
4.95
Rack [A9179_N3] Rack [A9179_N3]
Myford Part No: 73/1112/1Length: 510 mm (20") for standard bed length lathesThis is the later type longer rack for power cross feed Super 7's but can be used as...
39.95
Leadscrew Bracket R.H. [G9289/2_U] Leadscrew Bracket R.H. [G9289/2_U]
low in stock! Sold
R.H. Leadscrew Bracket Assembly - with dowel holes for lathes with gearbox - can be used on any 7-Series lathe
Myford Part No: G9289/2
Comes with fixing s...
12.95
Headstock Pulley [A1994_k1] Headstock Pulley [A1994_k1]
Vee Cone Pulley Assembly - from a Mk2 lathe headstock but will also fit Mk1 lathes
Myford Part No. A1994
Condition: 8/10 - a bit of wear and a few marks b...
19.95
Headstock Pulley [A1994_k2] Headstock Pulley [A1994_k2]
Vee Cone Pulley Assembly - from a Mk2 lathe headstock but will also fit Mk1 lathes
Myford Part No. A1994
Condition: A bit worn and battered but still serv...
9.95
Headstock Spindle [A1992_k1] Headstock Spindle [A1992_k1]
low in stock! Sold
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: Good used - 8/10 to 9/10. There is a small ding on the register - Picture 2
Appli...
65
Headstock Spindle [A1992_k2] Headstock Spindle [A1992_k2]
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: excellent used - 9/10
Application: Super 7: ML7R
...
95
Headstock Rear Bearing Kit [HRBK_1] Headstock Rear Bearing Kit [HRBK_1]
Headstock spindle rear bearing kit
Myford Part No's: OEM bearings (2); A1991; A2055
Condition: 10/10
Category: Used items
Application: Super 7; ML7-...
24.95
60T Backgear Assembly [A1993/1_1] 60T Backgear Assembly [A1993/1_1]
60T Backgear Assembly
Myford Part No. A1993/1
Condition: Excellent little used - 9/10 to 10/10
Application: Super 7; ML7R
Category: Used item...
44.95
30T Gear [A1995_k1] 30T Gear [A1995_k1]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Good used - 8/10 to 9/10
Application: Super 7; ML7R...
8.95
30T Gear [A1995_k2] 30T Gear [A1995_k2]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Excellent used - 9/10
Application: Super 7; ML7R...
11.95
30T Gear [A1995_k3] 30T Gear [A1995_k3]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Excellent used - 9/10
Application: Super 7; ML7R...
11.95
Adjusting Collar [A2056_k2] Adjusting Collar [A2056_k2]
Adjusting Collar - fits at the end of the headstock spindle
Myford Part No: A2056
Condition: excellent used - 9/10
Application: Super 7; ML7-R
...
7.95
Adjusting Collar [A2056_k3] Adjusting Collar [A2056_k3]
Adjusting Collar with screw - fits at the end of the headstock spindle
Myford Part No: A2056
Condition: excellent used - 9/10
Application: Super 7; M...
7.95
Pulley Lock Assembly [A2751_k1] Pulley Lock Assembly [A2751_k1]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
8.95
Pulley Lock Assembly [A2751_k2] Pulley Lock Assembly [A2751_k2]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
9.95
« previous 1 2 3 ... 4 5 next »