Home
Blog
Contact
Basket
Forums
More Info
Centec Milling Machines
Overseas Orders
Privacy Policy
How to Order
Item Descriptions
Shipping & Dispatch
Returns
Lathe Archive
Myford Manuals
Lathe Archive
Milling Machines
Milling Machines
Private Adverts
Gallery/Resources
Photo Gallery
Sitemap
Subscribe
Keep up-to-date via e-mail!
ML7
Myford 3/8" Collet [MT23F8_1]
Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£22.95
Rack [A9179_N3]
Myford Part No: 73/1112/1Length: 510 mm (20") for standard bed length lathesThis is the later type longer rack for power cross feed Super 7's but can be used as...
£39.95
ML7 Motor Drive Belt [ML7MDB]
Standard Vee-Belt which drives from the motor pulley to the countershaft drive pulley.High quality belt from a major supplierApplication: ML7; ML7 Tri-LevaCateg...
£5.25
Guard Hinge Screws [A2024]
5/16" B.S.F hinge screws for Super 7 change gear guard; Super 7 motor drive belt guard & quick change gearbox end cover
Myford Part No. A2024
Quantity...
£4.25
Adjusting Screws [A2123]
Myford Part No: A2123Screws that fit into the countershaft to adjust the headstock belt tensionQuantity: pack of 2Condition: NewApplication: ML7; ML-7R; Super 7...
£5.45
Thrust Collar - Leadscrew [75-1115-1]
Myford Part No: 75/1115/1Thrust collar which fits on the leadscrew to bear against the R.H leadscrew support bracketApplication: ML7; ML-7R; Super 7Category: Ne...
£2.95
3/8" BSF Simmonds Nuts [3F8BSFNKP]
Locking nuts to fit the tailstock clamping stud and to secure the tailstock handwheel
Thread: 3/8" B.S.F
Finish: Bright zinc plate
Unit Quantity: Pack ...
£2.50
7/16" BSF Simmonds Nut [7F16BSFNKP]
Locking nut used at the R.H end of the leadscrew
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 7/16" B.S.F
Finish: Bright zinc pla...
£1.95
24 Tooth Gear [ A3115]
Myford Part No: A3115 (11285/24)
24 tooth gear which fits to the tumbler sleeve gear on lathes fitted with a quick change gearbox
Condition: New
Appli...
£8.95
2 BA Oil Nipple [33/072]
Sold
Replacement oil nipples used throughout Myford lathesFlat front face and spherical rear form permits use with all types of push fit oil guns These nipples have ...
£7.50
Woodruff Keys [404WK]
Myford reference: Woodruf Key No. 404Used throughout Myford lathesSize: ½" x ⅛"Quantity: Pack of 5Application: ML7; ML-7R; ML10; Super 7Category: New_Item...
£3.95
Gear Cover Assembly [75/1340]
Sold
Myford Part No: 73/1340Gear cover assembly for lathes fitted with aluminium alloy apron and 5/8" diameter leadscrew.Fitted with new Oilite bushCondition: 9/10Ap...
£12.95
Tumbler Reverse Stud [75/1222]
Sold
Myford Part No: 75/1222Tumbler reverse studCondition: 10/10Application: ML7Category: New old stock (N.O.S)...
£4.95
Screwed Bush [75/1220]
Myford Part No: 75/1220 Screwed bush which fits into the tumbler reverse and backgear levers to retain the plungersCondition: New Application: ML7; ML-7R; Super...
£1.95
Pinion Bush - Long [AABL]
Sold
Pinion bush for ML7 lathes fitted with die-cast aluminium apron
Used on all ML7 lathes up to and including serial number K111726 on aprons fitted with the ge...
£3.95
Faceplate Clamps [86_2]
Sold
Myford Part No. 86
Set of 4 faceplate clamps
Length: 2 1/2"
They are suitable for clamping work not only to the faceplate but also to the cross slide a...
£9.95
Changewheel Stud [70_1136_1]
Sold
Myford Part No: 70/1136/1Changewheel stud assembly (Genuine Beeston factory item)Condition: 9/10Application: ML7Category: Used_Items...
£12.95
Leadscrew Guard [A4188_1_N]
Sold
Leadscrew GuardMyford Part No: A4188/1Colour: Green - poor paintCondition: Unused Beeston factory stockApplication: ML7; Super 7; ML-7RCategory: New_Item...
£7.95
Back Gear Key [75_1227_2]
Sold
Myford Back Gear KeyMyford Part No: 75/1227Condition: 9/10 to 10/10Application: ML7Category: Used_Items...
£5.95
Myford Collet Nose Piece [MA1438_3U]
Sold
Myford Part No. 1438Collet Nose Piece enables Myford MT2 Collets (11445) to be fitted directly into the headstock spindleCondition: 9/10Application: ML7; ML-7R;...
£21.95
Myford 7/32" Collet [MT27F32_1]
Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£20.95
Myford 5/16" Collet [MT25F16_1]
Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£17.95
Change Gear Quadrant Assembly [A4736_k1]
Myford Part No. A4736Colour: Grey - originalCondition: 9/10Application: ML7; ML-7R; Super 7Category: Used Item...
£17.95
Motor Fastener Kit [MFK_k1]
Sold
This is a set of fasteners used to secure an ML7 or Super 7 motor to the motor platform
Category: Used items
Application: ML7; Super 7; ML7-R...
£6.95
Tie Bar [A2046_k1]
Pair of Tie Bars used to support the motor platform Myford Part No: A2046 Condition: Excellent Application: Super 7; ML7-RCategory: Used Items...
£7.95
Leadscrew Bracket R.H. [74/1135_k1]
R.H. Leadscrew Bracket AssemblyMyford Part No: 74/1135Comes with fixing screwsColour: GreyCondition: Excellent usedApplication: Super 7; ML7...
£10.95
Change Gear Stud Assembly [A1496K_k1]
Sold
Change Gear Stud Assembly
Myford part No's. A1496 Stud; A1500 Bush; A1501 Sleeve; A1499 Spacer; A1498 Washer; B.S.F Nut
Condition: New old stock - worksho...
£21.95
Thread Dial Indicator [MA1419_7N]
Sold
Thread Dial IndicatorMyford Part No.1419Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when...
£105
Bed Felt Wiper - Narrow Guide [70_1328]
Myford Part No. 70/1328 - sealed in its packaging
This wiper is for Series 7 lathes with narrow guide beds
Note there are two different versions of bed ...
£7.95
Lubricating Wick [A3610_1]
Lubricating Wick
Myford Part No. A3610/1
Used to take oil to the headstock front spindle bearing
Application: Super 7; ML7-R
Category: New old stock...
£9.95
Spring [A3611_1]
Spring
Myford Part No. A3611/1
Used to provide axial load to the headstock front bearing lubrication wick
Application: Super 7; ML7-R
Category: New ...
£4.95
Sealing Plug Assembly [A4770_OR]
Sealing Plug Assembly
Myford Part No. A4770 plus O-ring
Used to seal the oil way drilling for the headstock front bearing
Application: Super 7; ML7-R$!...
£5.95
Apron Handwheel [A2087_U4]
Sold
Myford Part No. A2087
Handwheel assembly to fit 7 Series lathes fitted with a 7/16" diameter traverse pinion shaft / cast iron apron assembly.
Application...
£17.95
Cam & Lever [A1837_1_4]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
£12.95
Super 7 Tailstock Assembly [S7TA_2]
Complete tailstock assembly for a Super 7 lathe
Barrel Graduations: Imperial
Colour: Grey
Condition: in good mechanical order, nice smooth action, pain...
£165
Apron Screws [S7A_Screws]
Set of 5 Imperial screws used to fasten the apron to the saddle on Series 7 lathes with alloy and cast iron aprons. (Only 3 are used on early ML7's and 4 on som...
£4.50
60T Backgear Assembly [A1993/1_1]
60T Backgear Assembly
Myford Part No. A1993/1
Condition: Excellent little used - 9/10 to 10/10
Application: Super 7; ML7R
Category: Used item...
£44.95
Cam & Lever Assembly [75_1332]
Myford Part No: 75/1332
Cam & lever assembly with knob for earlier lathes with the aluminium alloy apron and 5/8" diameter leadscrew
Condition: Good u...
£12.95
ML7 Leadscrew Nut [73_1310_1]
Sold
Myford Part No: 73/1310/1
Leadscrew Nut for earlier lathes fitted with a 5/8" diameter leadscrew
Condition: Good - 9/10
Application: ML7
Category: ...
£49.95
Apron Handwheel [A2087_U5]
Sold
Myford Part No. A2087
Handwheel assembly to fit 7 Series lathes fitted with a 7/16" diameter traverse pinion shaft / cast iron apron assembly.
Application...
£19.95
ML7 Handwheel Assembly [75_1331]
Sold
Myford Part No. 75/1331
Handwheel assembly to fit earlier ML7 lathes fitted with a 3/8" diameter traverse pinion shaft / aluminium apron assembly (later hand...
£16.95
Leadscrew Handwheel [MA1430_k2]
Sold
Leadscrew Handwheel
The Imperial leadscrew handwheel has 125 divisions each representing 0.001". This accessory can be used in order to obtain a fine feed to...
£34.95
Adjusting Collar [A2056_k2]
Adjusting Collar - fits at the end of the headstock spindle
Myford Part No: A2056
Condition: excellent used - 9/10
Application: Super 7; ML7-R
...
£7.95
30T Gear [A1995_k3]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Excellent used - 9/10
Application: Super 7; ML7R...
£11.95
30T Gear [A1995_k2]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Excellent used - 9/10
Application: Super 7; ML7R...
£11.95
Headstock Spindle [A1992_k2]
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: excellent used - 9/10
Application: Super 7: ML7R
...
£95
Pulley Lock Assembly [A2751_k1]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
£8.95
Backgear Lever [A1949_1_5A]
Backgear lever assembly
Comprising the following Myford Part No's:
A1949/1 Backgear Lever; A3021 Plunger; A3025 Spring; 75/1220 Screwed Bush; Knob & G...
£29.95
Backgear Cluster [ A1939_k2]
17/53 T Backgear Cluster
Myford Part No: A1939
Condition: 8/10
Application: Super 7 and ML7R
Category: Used item...
£34.95
Leadscrew Bracket L.H. [74/1134_3]
Sold
L.H. Leadscrew Bracket Assembly
Myford Part No. 74/1134
Comes with A4725 Studs, nuts, washers and oil nipple
Colour: Grey
Condition: 10/10
Applic...
£24.95
Change Gear Guard Backplate [73/1105/2]
Change Gear Guard Backplate with 3 new fixing screws
Myford Part No: 73/1105/2
Application: ML7
Category: Used item...
£17.95
7" Diameter Faceplate [S7_7FP]
Myford Standard Faceplate
Size: 7 inch diameter
Fitting: Standard Myford spindle nose thread (1 1/8" - 12 tpi Whitworth form)
Colour: Green
Cond...
£32.95
9" Diameter Faceplate [1437_1]
Myford Part No. 1437
For work which is too large for the standard 6 3/4" diameter faceplate. It has eight radial slots for the securing bolts for workpieces...
£67.95
Change Gear Quadrant Assembly [A4736_k2]
Myford Part No. A4736
Colour: Grey - original
Condition: 10/10 - may have been assembled
Application: ML7; ML-7R; Super 7
Category: New old stock...
£21.95
Feedscew & Nut [VSFS_N]
Feedscrew and nut for Myford small vertical slide
Imperial 10 TPI
This is the same assembly as used on an ML7 topslide except that it is 1" longer but can...
£29.95
Motor Platform [A1945_1]
Motor Platform
Myford Part No. A1945
Colour: Green
Category: Used item
Application: Super 7; ML7-R...
£24.95
Motor Platform [A1945_2]
Motor Platform
Myford Part No. A1945
Colour: Grey
Category: Used item
Application: Super 7; ML7-R...
£24.95
Motor Platform Fixing Kit [MPFK_1]
Set of parts to attach the motor platform to the countershaft arm
Myford Part No's: A2046 (2); A2050; A2051;A2022; 1/4" BSF nut
Category: Used items
Ap...
£15.95
Headstock Rear Bearing Kit [HRBK_1]
Headstock spindle rear bearing kit
Myford Part No's: OEM bearings (2); A1991; A2055
Condition: 10/10
Category: Used items
Application: Super 7; ML7-...
£24.95
Pulley Lock Assembly [A2751_k2]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
£9.95
Adjusting Collar [A2056_k3]
Adjusting Collar with screw - fits at the end of the headstock spindle
Myford Part No: A2056
Condition: excellent used - 9/10
Application: Super 7; M...
£7.95
30T Gear [A1995_k1]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Good used - 8/10 to 9/10
Application: Super 7; ML7R...
£8.95
Headstock Spindle [A1992_k1]
Sold
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: Good used - 8/10 to 9/10. There is a small ding on the register - Picture 2
Appli...
£65
Headstock Pulley [A1994_k1]
Vee Cone Pulley Assembly - from a Mk2 lathe headstock but will also fit Mk1 lathes
Myford Part No. A1994
Condition: 8/10 - a bit of wear and a few marks b...
£19.95
Backgear Eccentric [A1986/1_U]
Backgear Eccentric - later circlip version (early & later version are interchangeable as assemblies)
Myford Part No: A1986/1
Comes with the circlip t...
£14.95
Backgear Lever [A1949/1_k2]
Backgear lever assembly
Comprising the following Myford Part No's:
A1949/1 Backgear Lever; A3021 Plunger; A3025 Spring; 75/1220 Screwed Bush; Knob & G...
£29.95
Leadscrew Bracket R.H. [G9289/2_U]
Sold
R.H. Leadscrew Bracket Assembly - with dowel holes for lathes with gearbox - can be used on any 7-Series lathe
Myford Part No: G9289/2
Comes with fixing s...
£12.95
Cam & Lever [A1837/1_2U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Green
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and ...
£12.95
Cam & Lever [A1837/1_3U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
£12.95
24 Tooth Gear [ A3115_U1]
Sold
Myford Part No: A3115 (11285/24)
24 tooth gear which fits to the tumbler sleeve gear on lathes fitted with a quick change gearbox
Condition: 9/10
Appl...
£4.95
Barrel Locking lever [75/1504_U1]
Sold
Barrel locking lever for the tailstock
Myford Part No: 75/1504
Condition: 9/10 - minor plating loss
Application: ML7
Category: Used item...
£9.95
Spring Clips [A2044_k1]
Pair of spring clips & screws used to secure the headstock belt guard
Myford Part No: A2044
Condition: These clips may need trimming to fit the belt g...
£4.95
Handle [80005_k1]
Handle for the headstock belt guard complete with fixing screws. This is the earlier smaller type handle
Myford Part No: 80005
Application: Super 7; ML7-R...
£4.95
Guard Hinge Screws [A2043_k1]
Pair of hinge screws & 5/16" B.S.F locknuts for Super 7 headstock belt guard
Myford Part No. A2043
Application: Super 7; ML7-R
Category: Used items...
£4.25
Roller & Plunger Assembly [A4733_U1]
Roller & Plunger Assembly complete with Spring - used to hold the headstock belt guard open
Myford Part No's: A4733
Condition: 9/10 to 10/10
App...
£7.95
Backgear Lever [A1949/1_k3]
Backgear lever assembly
Comprising the following Myford Part No's:
A1949/1 Backgear Lever; A3021 Plunger; A3025 Spring; 75/1220 Screwed Bush; Knob & G...
£29.95
Spring [A2939_U1]
Spring used in conjunction with roller assembly to hold the headstock belt guard open
Myford Part No: A2939
Application: Super 7; ML7-R
Category: U...
£2.95
Tool Clamp [74/1409/1_U]
Standard tool clamp to suit all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 74/1409/1
Condition: 9/10 to 10/10
Application: Super 7; ML7-...
£9.95
Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
£2.95
Nut - Tool Clamp [75/1412]
Nut used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 75/1412
Application: Super 7; ML7-R; ML7; ML10; Speed 1...
£3.95
Tool Clamp Stud Assembly [S7TCSA]
Tool clamp stud assembly used to retain the tool post on all 7-Series, 10-Series and 254-Series lathes
Myford Part No's: 75/1406; A2806; 75/1410; 75/1412
...
£14.95
Tumbler Sleeve Gear [75/1232/2_U]
Sold
Myford 25 Tooth Tumbler Sleeve Gear
Myford Part No: 75/1232/2
Condition: 9/10
Application: ML7
Category: Used item...
£21.95
Raiser Block Stud Set [RBSS]
Sold
Set of 4 studs used to clamp the lathe bed to the cabinet when using raiser blocks. Can also be used when mounting lathe on a timber bench. Studs are 4" long an...
£6.95
Raiser Block Levelling Inserts [RBIB4]
Sold
Set of 4 insert bushes for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7;...
£8.95
Raiser Block Levelling Insert [RBIB1]
Single insert bush for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7; ML7...
£2.50
Raiser Block Stud Assemblies [RBSA4]
Sold
Set of 4 stud assemblies used to clamp the lathe bed to the cabinet when using raiser blocks.
Condition: 9/10 - rubber seals are aged
Application: Super 7...
£19.95