basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


Myford lathe accessories

Swivelling Vertical Slide [MA68/2] Swivelling Vertical Slide [MA68/2]
Myford Part No. MA68/2
Imperial version with a 10 tpi feedscrew and a micrometer dial having 0.001" graduations
Table size is 5" x 4" (125 x 100 mm)$!...
179.95
Feedscew & Nut [VSFS_N] Feedscew & Nut [VSFS_N]
Feedscrew and nut for Myford small vertical slide
Imperial 10 TPI
This is the same assembly as used on an ML7 topslide except that it is 1" longer but can...
29.95
Leadscrew Handwheel [MA1430_k2] Leadscrew Handwheel [MA1430_k2]
low in stock! Sold
Leadscrew Handwheel
The Imperial leadscrew handwheel has 125 divisions each representing 0.001". This accessory can be used in order to obtain a fine feed to...
34.95
7 7" Diameter Faceplate [S7_7FP]
Myford Standard Faceplate
Size: 7 inch diameter
Fitting: Standard Myford spindle nose thread (1 1/8" - 12 tpi Whitworth form)
Colour: Green
Cond...
32.95
9 9" Diameter Faceplate [1437_1]
Myford Part No. 1437
For work which is too large for the standard 6 3/4" diameter faceplate. It has eight radial slots for the securing bolts for workpieces...
67.95
Myford 4 Myford 4" Angle Plate [MA227]
Myford Part No: MA227
Angle plate suitable for use on faceplates, vertical slides and general work holding. These plates have slots in both faces.
Size: ...
19.95
Myford 6 Myford 6" Angle Plate [MA227B]
low in stock! Sold
Myford Part No: MA227B
Angle plate suitable for use on faceplates, vertical slides and general work holding. These plates have slots in both faces.
Size:...
24.95
Thread Dial Indicator [MA1419_7N] Thread Dial Indicator [MA1419_7N]
low in stock! Sold
Thread Dial IndicatorMyford Part No.1419Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when...
105
Faceplate Clamps [86_2] Faceplate Clamps [86_2]
low in stock! Sold
Myford Part No. 86
Set of 4 faceplate clamps
Length: 2 1/2"
They are suitable for clamping work not only to the faceplate but also to the cross slide a...
9.95
Myford 7/32 Myford 7/32" Collet [MT27F32_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
20.95
Myford 5/16 Myford 5/16" Collet [MT25F16_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
17.95
Myford 3/8 Myford 3/8" Collet [MT23F8_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
22.95
Myford 3/8 Myford 3/8" Collet [MT23F8_2]
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
14.95
Myford Collet Nose Piece [MA1438_3U] Myford Collet Nose Piece [MA1438_3U]
low in stock! Sold
Myford Part No. 1438Collet Nose Piece enables Myford MT2 Collets (11445) to be fitted directly into the headstock spindleCondition: 9/10Application: ML7; ML-7R;...
21.95