basket  £0

 

 

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts

Plunger [A3021] Plunger [A3021]
Myford Part No: A3021Plunger used to lock the tumbler reverse and backgear levers on Super 7 lathesCondition: New Application: ML-7R; Super 7 Category: New Old ...
£7.95
Speed 10 / Diamond 10 Motor Drive Belt [SD10MDB] Speed 10 / Diamond 10 Motor Drive Belt [SD10MDB]
low in stock! Sold
Standard Vee-Belt which drives from the motor pulley to the counter-shaft drive pulley.High quality belt from a major manufacturerApplication: Speed 10; Diamond...
£5.25
Pinion Bush - Long [AABL] Pinion Bush - Long [AABL]
low in stock! Sold
Pinion bush for ML7 lathes fitted with die-cast aluminium apron
Used on all ML7 lathes up to and including serial number K111726 on aprons fitted with the ge...
£3.95
Pinion Bush - Short [AABS] Pinion Bush - Short [AABS]
Rack pinion support bush for ML7 lathes fitted with die-cast aluminium apron
Used on all ML7 lathes up to and including serial number K111726 on aprons fitte...
£6.95
Bedway Plate [IHBP] Bedway Plate [IHBP]
Myford plate for rivetting to 7-Series lathes with induction hardened bedways
New old stock...
£4.95
ML10 Headstock Drive Belt [ML10HDB] ML10 Headstock Drive Belt [ML10HDB]
low in stock! Sold
Standard Vee-Belt which drives from the 3-step pulley on the countershaft to the headstock spindle drive pulley.High quality belt from a major supplierApplicati...
£5.25
ML10 Motor Drive Belt [ML10MDB] ML10 Motor Drive Belt [ML10MDB]
Standard Vee-Belt which drives from the motor pulley to the counter-shaft drive pulley.Application: ML10 – not Speed 10 or Diamond 10Category: New_Items...
£4.75
Tumbler Reverse Lever Assembly [S7_TRLA_U] Tumbler Reverse Lever Assembly [S7_TRLA_U]
low in stock! Sold
Tumbler reverse lever assembly Comprising the following Myford Part No's: A1948/1 Tumbler Reverse Lever; A2005/2 Stud; A2008 Gear Studs; A3021 Plunger; A3025 Sp...
£14.95
Tumbler Reverse Screw [A1997_1_U] Tumbler Reverse Screw [A1997_1_U]
low in stock! Sold
Screw used to locate the tumbler reverse lever assembly complete with locknut.
Myford Part no: A1997/1
Condition: 9/10
Category: Used Items...
£1
Changewheel Stud [70_1136_1] Changewheel Stud [70_1136_1]
low in stock! Sold
Myford Part No: 70/1136/1Changewheel stud assembly (Genuine Beeston factory item)Condition: 9/10Application: ML7Category: Used_Items...
£12.95
Backgear Eccentric [A1986_4U] Backgear Eccentric [A1986_4U]
Eccentric shaft which carries the backgear in the headstockEarly version which uses a screw to retain the backgear Myford Part No: A1986 Condition: 9/10 Applica...
£7.95
Plunger Kit [ PLPK_U] Plunger Kit [ PLPK_U]
low in stock! Sold
Kit of parts used to retain the Pulley Lock Assembly
Myford Part No's: A2001 Plunger; A1610 Spring; 5/16" BSF x 1/4" Grubscrew
Condition: 9/10
Category...
£2.95
Leadscrew Guard [A4188_1_N] Leadscrew Guard [A4188_1_N]
low in stock! Sold
Leadscrew GuardMyford Part No: A4188/1Colour: Green - poor paintCondition: Unused Beeston factory stockApplication: ML7; Super 7; ML-7RCategory: New_Item...
£7.95
Myford 65 Tooth Change Gear [CG65T_N] Myford 65 Tooth Change Gear [CG65T_N]
Myford 65 T changewheel (Original Beeston factory quality item)
Myford Part No. 11285/65
Colour: Green
Application: 7 Series; 10 Series & 254 lat...
£17.95
Rack [A9179_N3] Rack [A9179_N3]
Myford Part No: 73/1112/1Length: 510 mm (20") for standard bed length lathesThis is the later type longer rack for power cross feed Super 7's but can be used as...
£39.95
ML7 Apron Assembly [ML7AA] ML7 Apron Assembly [ML7AA]
low in stock! Sold
Re-furbished early type aluminium apron assembly to fit ML7 lathes fitted with a 5/8" diameter leadscrew.
It comes with pinions, gear casing, gib strip and o...
£69.95
« previous 1 2 3 4 ... 7 8 next »