basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts > ML7 Parts

myford lathe parts  > ML7 Parts

Tumbler Sleeve Gear [75/1232/2_U] Tumbler Sleeve Gear [75/1232/2_U]
low in stock! Sold
Myford 25 Tooth Tumbler Sleeve Gear
Myford Part No: 75/1232/2
Condition: 9/10
Application: ML7
Category: Used item...
21.95
Adjusting Screws [A2123] Adjusting Screws [A2123]
Myford Part No: A2123Screws that fit into the countershaft to adjust the headstock belt tensionQuantity: pack of 2Condition: NewApplication: ML7; ML-7R; Super 7...
5.45
Thrust Collar - Leadscrew [75-1115-1] Thrust Collar - Leadscrew [75-1115-1]
Myford Part No: 75/1115/1Thrust collar which fits on the leadscrew to bear against the R.H leadscrew support bracketApplication: ML7; ML-7R; Super 7Category: Ne...
2.95
Apron Screws [S7A_Screws] Apron Screws [S7A_Screws]
Set of 5 Imperial screws used to fasten the apron to the saddle on Series 7 lathes with alloy and cast iron aprons. (Only 3 are used on early ML7's and 4 on som...
4.50
7 Series Apron Assembly [S7AA_4] 7 Series Apron Assembly [S7AA_4]
Cast iron apron assembly to fit 7 Series lathes with 3/4" diameter leadscrew
Comprising:
A2081/1 Apron; 75/1340 Gear Cover Assembly; A2082 Gib StripA2085 ...
74.95
Cam & Lever [A1837/1_3U] Cam & Lever [A1837/1_3U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
12.95
Barrel Locking lever [75/1504_U1] Barrel Locking lever [75/1504_U1]
low in stock! Sold
Barrel locking lever for the tailstock
Myford Part No: 75/1504
Condition: 9/10 - minor plating loss
Application: ML7
Category: Used item...
9.95
Tool Clamp [74/1409/1_U] Tool Clamp [74/1409/1_U]
Standard tool clamp to suit all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 74/1409/1
Condition: 9/10 to 10/10
Application: Super 7; ML7-...
9.95
Feedscew & Nut [VSFS_N] Feedscew & Nut [VSFS_N]
Feedscrew and nut for Myford small vertical slide
Imperial 10 TPI
This is the same assembly as used on an ML7 topslide except that it is 1" longer but can...
29.95
Spring [A2806] Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
2.95
Cam & Lever [A1837_1_4] Cam & Lever [A1837_1_4]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
12.95
Leadscrew Bracket R.H. [G9289/2_U] Leadscrew Bracket R.H. [G9289/2_U]
low in stock! Sold
R.H. Leadscrew Bracket Assembly - with dowel holes for lathes with gearbox - can be used on any 7-Series lathe
Myford Part No: G9289/2
Comes with fixing s...
12.95
Cam & Lever [A1837/1_2U] Cam & Lever [A1837/1_2U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Green
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and ...
12.95
Raiser Block Levelling Insert [RBIB1] Raiser Block Levelling Insert [RBIB1]
Single insert bush for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7; ML7...
2.50
Raiser Block Stud Assemblies [RBSA4] Raiser Block Stud Assemblies [RBSA4]
low in stock! Sold
Set of 4 stud assemblies used to clamp the lathe bed to the cabinet when using raiser blocks.
Condition: 9/10 - rubber seals are aged
Application: Super 7...
19.95
7 Series Apron Assembly [S7AA_5] 7 Series Apron Assembly [S7AA_5]
Cast iron apron assembly to fit 7 Series lathes with 3/4" diameter leadscrew
Comprising:
A2081/2 Apron; 75/1340 Gear Cover Assembly; A2082 Gib StripA2085 ...
89.95
« previous 1 2 3 next »