More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts > 7-Series Parts

myford lathe parts  > 7-Series Parts

Apron Handwheel [A2087_U4] Apron Handwheel [A2087_U4]
low in stock! Sold
Myford Part No. A2087
Handwheel assembly to fit 7 Series lathes fitted with a 7/16" diameter traverse pinion shaft / cast iron apron assembly.
Application...
£17.95
Bed Felt Wiper - Narrow Guide [70_1328] Bed Felt Wiper - Narrow Guide [70_1328]
Myford Part No. 70/1328 - sealed in its packaging
This wiper is for Series 7 lathes with narrow guide beds
Note there are two different versions of bed ...
£7.95
Leadscrew Bracket L.H. [74/1134_3] Leadscrew Bracket L.H. [74/1134_3]
low in stock! Sold
L.H. Leadscrew Bracket Assembly
Myford Part No. 74/1134
Comes with A4725 Studs, nuts, washers and oil nipple
Colour: Grey
Condition: 10/10
Applic...
£24.95
Nut - Tool Clamp [75/1412] Nut - Tool Clamp [75/1412]
Nut used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 75/1412
Application: Super 7; ML7-R; ML7; ML10; Speed 1...
£3.95
Tool Clamp Stud Assembly [S7TCSA] Tool Clamp Stud Assembly [S7TCSA]
Tool clamp stud assembly used to retain the tool post on all 7-Series, 10-Series and 254-Series lathes
Myford Part No's: 75/1406; A2806; 75/1410; 75/1412
...
£14.95
Tool Clamp [74/1409/1_U] Tool Clamp [74/1409/1_U]
Standard tool clamp to suit all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 74/1409/1
Condition: 9/10 to 10/10
Application: Super 7; ML7-...
£9.95
Change Gear Quadrant Assembly [A4736_k2] Change Gear Quadrant Assembly [A4736_k2]
Myford Part No. A4736
Colour: Grey - original
Condition: 10/10 - may have been assembled
Application: ML7; ML-7R; Super 7
Category: New old stock...
£21.95
Spring [A2806] Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
£2.95
Cam & Lever [A1837/1_2U] Cam & Lever [A1837/1_2U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Green
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and ...
£12.95
Raiser Block Stud Set [RBSS] Raiser Block Stud Set [RBSS]
low in stock! Sold
Set of 4 studs used to clamp the lathe bed to the cabinet when using raiser blocks. Can also be used when mounting lathe on a timber bench. Studs are 4" long an...
£6.95
Raiser Block Levelling Inserts [RBIB4] Raiser Block Levelling Inserts [RBIB4]
low in stock! Sold
Set of 4 insert bushes for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7;...
£8.95
Raiser Block Levelling Insert [RBIB1] Raiser Block Levelling Insert [RBIB1]
Single insert bush for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7; ML7...
£2.50
Raiser Block Stud Assemblies [RBSA4] Raiser Block Stud Assemblies [RBSA4]
low in stock! Sold
Set of 4 stud assemblies used to clamp the lathe bed to the cabinet when using raiser blocks.
Condition: 9/10 - rubber seals are aged
Application: Super 7...
£19.95
Super 7 Tailstock Assembly [S7TA_2] Super 7 Tailstock Assembly [S7TA_2]
low in stock! Sold
Complete tailstock assembly for a Super 7 lathe
Barrel Graduations: Imperial
Colour: Grey
Condition: in good mechanical order, nice smooth action, pain...
£165
« previous 1 2 next »