basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


RSS Feed of Latest Additions

Subscribe to our Latest Additions RSS Feed rss

You can subscribe to our Latest Additions RSS Feed (click link above) - doing so will allow you to keep track of the latest products/services added to our site, direct from your RSS Reader. If you're not sure what an RSS Reader is, have a look at Google's RSS Reader here.

Latest Additions Listed Here

Moore & Wright 2 - 3 Moore & Wright 2 - 3" Micrometer [MW_2F3]
Moore & Wright Model No. 967 micrometer
Range: 2 - 3"Graduation: 0.001"
Calibration: checked O.K.
Condition: Fixed anvil is damaged but still servi...
4.95
Moore & Wright 1 - 2 Moore & Wright 1 - 2" Micrometer [MW_1F2]
Moore & Wright Model No. 966 micrometer
Range: 1 - 2"Graduation: 0.001"Supplied with case, calibration block and adjusting spanner
Calibration: checke...
7.95
Moore & Wright 0 - 1 Moore & Wright 0 - 1" Micrometer [MW_0F1]
Moore & Wright Model No. 965 micrometer
Range: 0 - 1"Graduation: 0.001"Supplied with a case and adjusting spanner
Calibration: checked O.K.
Conditi...
5.95
End Plate Assembly [254EPA] End Plate Assembly [254EPA]
End plate assembly used on the compound slide to support the feedscrew
Myford Part No: 12089
Application: 254S; 254+
Category: New old stock...
9.95
Centec 30 Div. Indexing Plate [C30DIP] Centec 30 Div. Indexing Plate [C30DIP]
Centec indexing plate for use with the simple indexing head made specifically for use on their 2A, 2B & 2C milling machines
Number of divisions: 30
Co...
32.95
Wolf Jahn Tool Rest [WJHTRA] Wolf Jahn Tool Rest [WJHTRA]
Wolf Jahn & Co. hand turning rest & bed clamp for a 6 or 8mm Geneva pattern watchmakers lathe
The bed clamp fits a standard 20mm 'D" section bed with...
49.95
Myford 25 Tooth Change Gear [CG25T_2] Myford 25 Tooth Change Gear [CG25T_2]
Myford 25 T changewheel (Original Beeston factory quality item)
Myford Part No. 11285/25
Application: 7-Series; 10-Series; 254- Series
Condition: 9/1...
5.50
Myford 30 Tooth Change Gear [CG30T_2] Myford 30 Tooth Change Gear [CG30T_2]
low in stock! Sold
Myford 30 T changewheel (Original Beeston factory quality item)
Myford Part No. 11285/30
Application: 7-Series; 10-Series; 254- Series
Condition: 9/1...
5.50
Raiser Block Stud Assemblies [RBSA4] Raiser Block Stud Assemblies [RBSA4]
low in stock! Sold
Set of 4 stud assemblies used to clamp the lathe bed to the cabinet when using raiser blocks.
Condition: 9/10 - rubber seals are aged
Application: Super 7...
19.95
Raiser Block Levelling Insert [RBIB1] Raiser Block Levelling Insert [RBIB1]
Single insert bush for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7; ML7...
2.50
Raiser Block Levelling Inserts [RBIB4] Raiser Block Levelling Inserts [RBIB4]
low in stock! Sold
Set of 4 insert bushes for use with raiser blocks to level the lathe on a cabinet stand. Threaded 9/16" BSF
Condition: 9/10 to 10/10
Application: Super 7;...
8.95
Raiser Block Stud Set [RBSS] Raiser Block Stud Set [RBSS]
low in stock! Sold
Set of 4 studs used to clamp the lathe bed to the cabinet when using raiser blocks. Can also be used when mounting lathe on a timber bench. Studs are 4" long an...
6.95
Tumbler Sleeve Gear [75/1232/2_U] Tumbler Sleeve Gear [75/1232/2_U]
Myford 25 Tooth Tumbler Sleeve Gear
Myford Part No: 75/1232/2
Condition: 9/10
Application: ML7
Category: Used item...
21.95
Tool Clamp Stud Assembly [S7TCSA] Tool Clamp Stud Assembly [S7TCSA]
Tool clamp stud assembly used to retain the tool post on all 7-Series, 10-Series and 254-Series lathes
Myford Part No's: 75/1406; A2806; 75/1410; 75/1412
...
14.95
Nut - Tool Clamp [75/1412] Nut - Tool Clamp [75/1412]
Nut used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 75/1412
Application: Super 7; ML7-R; ML7; ML10; Speed 1...
3.95
Spring [A2806] Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
2.95
Tool Clamp [74/1409/1_U] Tool Clamp [74/1409/1_U]
Standard tool clamp to suit all 7-Series, 10-Series and 254-Series lathes
Myford Part No: 74/1409/1
Condition: 9/10 to 10/10
Application: Super 7; ML7-...
9.95
7 Series Apron Assembly [S7AA_4] 7 Series Apron Assembly [S7AA_4]
Cast iron apron assembly to fit 7 Series lathes with 3/4" diameter leadscrew
Comprising:
A2081/1 Apron; 75/1340 Gear Cover Assembly; A2082 Gib StripA2085 ...
74.95
7 Series Apron Assembly [S7AA_5] 7 Series Apron Assembly [S7AA_5]
Cast iron apron assembly to fit 7 Series lathes with 3/4" diameter leadscrew
Comprising:
A2081/2 Apron; 75/1340 Gear Cover Assembly; A2082 Gib StripA2085 ...
89.95
Spring [A2939_U1] Spring [A2939_U1]
Spring used in conjunction with roller assembly to hold the headstock belt guard open
Myford Part No: A2939
Application: Super 7; ML7-R
Category: U...
2.95
Backgear Lever [A1949/1_k3] Backgear Lever [A1949/1_k3]
Backgear lever assembly
Comprising the following Myford Part No's:
A1949/1 Backgear Lever; A3021 Plunger; A3025 Spring; 75/1220 Screwed Bush; Knob & G...
29.95
Roller & Plunger Assembly [A4733_U1] Roller & Plunger Assembly [A4733_U1]
Roller & Plunger Assembly complete with Spring - used to hold the headstock belt guard open
Myford Part No's: A4733
Condition: 9/10 to 10/10
App...
7.95
Guard Hinge Screws [A2043_k1] Guard Hinge Screws [A2043_k1]
Pair of hinge screws & 5/16" B.S.F locknuts for Super 7 headstock belt guard
Myford Part No. A2043
Application: Super 7; ML7-R
Category: Used items...
4.25
Handle [80005_k1] Handle [80005_k1]
Handle for the headstock belt guard complete with fixing screws. This is the earlier smaller type handle
Myford Part No: 80005
Application: Super 7; ML7-R...
4.95
Spring Clips [A2044_k1] Spring Clips [A2044_k1]
Pair of spring clips & screws used to secure the headstock belt guard
Myford Part No: A2044
Condition: These clips may need trimming to fit the belt g...
4.95
Barrel Locking lever [75/1504_U1] Barrel Locking lever [75/1504_U1]
low in stock! Sold
Barrel locking lever for the tailstock
Myford Part No: 75/1504
Condition: 9/10 - minor plating loss
Application: ML7
Category: Used item...
9.95
24 Tooth Gear [ A3115_U1] 24 Tooth Gear [ A3115_U1]
Myford Part No: A3115 (11285/24)
24 tooth gear which fits to the tumbler sleeve gear on lathes fitted with a quick change gearbox
Condition: 9/10
Appl...
4.95
Tumbler Sleeve Gear [A1998_U] Tumbler Sleeve Gear [A1998_U]
Myford Tumbler Sleeve Gear Assembly
Myford Part No: A1998 (10351)
Condition: 9/10
Application: ML-7R; Super 7
Category: Used item...
24.95
Cam & Lever [A1837/1_3U] Cam & Lever [A1837/1_3U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
12.95
Cam & Lever [A1837/1_2U] Cam & Lever [A1837/1_2U]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Green
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and ...
12.95