basket  0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


ML 7R - Page 3

Super 7 Headstock Drive Belt [S7HDB_OVB] Super 7 Headstock Drive Belt [S7HDB_OVB]
Premium quality Optibelt-VB vee belt - which were fitted as original equipment by the Myford (Beeston) factory.Myford Reference: Super 7 Secondary Drive vee bel...
8.50
Change Gear Quadrant Assembly [CGQA_4] Change Gear Quadrant Assembly [CGQA_4]
low in stock! Sold
Myford Part No. A4736Colour: Grey - originalCondition: 9/10Application: ML7; ML-7R; Super 7Category: Used_Items ...
11.95
Backgear Lever [A1949_1_4UG] Backgear Lever [A1949_1_4UG]
low in stock! Sold
Backgear lever assemblyComprising the following Myford Part No's:A1949/1 Backgear Lever; A3021 Plunger; A3025 Spring; 75/1220 Screwed Bush; Knob & Grubscrew...
12.95
Thread Dial Indicator [MA1419_6] Thread Dial Indicator [MA1419_6]
low in stock! Sold
Myford Part No.1419 Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when the leadscrew half ...
Thread Dial Indicator [MA1419_7N] Thread Dial Indicator [MA1419_7N]
low in stock! Sold
Myford Part No.1419Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when the leadscrew half n...
Leadscrew Guard [A4188_1_N] Leadscrew Guard [A4188_1_N]
low in stock! Sold
Leadscrew GuardMyford Part No: A4188/1Colour: Green - poor paintCondition: Unused Beeston factory stockApplication: ML7; Super 7; ML-7RCategory: New_Item ...
7.95
Leadscrew Guard - Short [LSG_1U] Leadscrew Guard - Short [LSG_1U]
low in stock! Sold
Leadscrew Guard - this guard is 25mm shorter than standard and is for use on lathes fitted with a gearbox where maximum saddle travel is required.Colour: GreenC...
7.95
30 Tooth Tumbler Gear [A2006_3N] 30 Tooth Tumbler Gear [A2006_3N]
low in stock! Sold
30 tooth fibre Tumbler Gear Application: ML-7R; Super 7 Category: New_Item...
11.95
28 Tooth Tumbler Gear [A2007_3N] 28 Tooth Tumbler Gear [A2007_3N]
low in stock! Sold
28 tooth fibre Tumbler Gear Application: ML-7R; Super 7 Category: New_Item...
11.95
Re-ground Bed & Saddle [S7RBA_1] Re-ground Bed & Saddle [S7RBA_1]
low in stock! Sold
Myford factory (Beeston) re-ground bed and saddle assembly.This is a bed and saddle from a lathe that was going through the factory reconditioning process at th...
Myford Collet Nose Piece [MA1438_3U] Myford Collet Nose Piece [MA1438_3U]
low in stock! Sold
Myford Part No. 1438Collet Nose Piece enables Myford MT2 Collets (11445) to be fitted directly into the headstock spindleCondition: 9/10Application: ML7; ML-7R;...
21.95
Myford Collet Closing Tube [MA1439_3U] Myford Collet Closing Tube [MA1439_3U]
low in stock! Sold
Myford Part No. 1439 (2MT Collets) Collet Closing Tube comprises 11446 Extractor Sleeve and14367 Extractor. This device is intended for closing the collet to si...
14.95
Myford 7/32 Myford 7/32" Collet [MT27F32_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
20.95
Myford 1/4 Myford 1/4" Collet [MT21F4_1]
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
19.95
Myford 9/32 Myford 9/32" Collet [MT29F32_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
22.95
Myford 5/16 Myford 5/16" Collet [MT25F16_1]
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
20.95
« previous 1 2 3 next »