Oil Gun - Type 1 [OG_110T1]
Oil Gun for Myford Lathe
Pump type high pressure oil gun.
· Primarily intended for use on Myford ML7, Super Seven and ML10 lathes although these guns would be suitable for many other applications.
· The nozzle incorporates an elastomeric sealing element which has been specially designed to seal on both the flat faced nipples and the later rounded type nipples used on Myford lathes.
· The guns can be used on most lubrication nipples on Super 7 & ML7 lathes - exceptions are:
ML7 spindle pulley
Super 7 spindle pulley on some lathes without the access cut-out
Super 7 back gear on some lathes
· These guns have been designed to work with low viscosity oils (such as H32 Nuto) as specifiedby Myford and other machine manufacturers for general lubrication including headstock spindles, tailstock barrels and oilite bushes.
Oil capacity - 110 ml
Maximum pressure - 100bar (1450 psi)
See photographs 3 & 4 for typical applications
|General service feedback from our customers who bought this item
[3.5 = Satisfactory]