basket  £0

 

 

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


Myford lathe accessories

Swivelling Vertical Slide [MA68/2] Swivelling Vertical Slide [MA68/2]
Myford Part No. MA68/2
Imperial version with a 10 tpi feedscrew and a micrometer dial having 0.001" graduations
Table size is 5" x 4" (125 x 100 mm)$!...
£179.95
Feedscew & Nut [VSFS_N] Feedscew & Nut [VSFS_N]
Feedscrew and nut for Myford small vertical slide
Imperial 10 TPI
This is the same assembly as used on an ML7 topslide except that it is 1" longer but can...
£29.95
Leadscrew Handwheel [MA1430_k2] Leadscrew Handwheel [MA1430_k2]
low in stock! Sold
Leadscrew Handwheel
The Imperial leadscrew handwheel has 125 divisions each representing 0.001". This accessory can be used in order to obtain a fine feed to...
£34.95
7 7" Diameter Faceplate [S7_7FP]
Myford Standard Faceplate
Size: 7 inch diameter
Fitting: Standard Myford spindle nose thread (1 1/8" - 12 tpi Whitworth form)
Colour: Green
Cond...
£32.95
9 9" Diameter Faceplate [1437_1]
Myford Part No. 1437
For work which is too large for the standard 6 3/4" diameter faceplate. It has eight radial slots for the securing bolts for workpieces...
£67.95
Myford 4 Myford 4" Angle Plate [MA227]
Myford Part No: MA227
Angle plate suitable for use on faceplates, vertical slides and general work holding. These plates have slots in both faces.
Size: ...
£19.95
Myford 6 Myford 6" Angle Plate [MA227B]
low in stock! Sold
Myford Part No: MA227B
Angle plate suitable for use on faceplates, vertical slides and general work holding. These plates have slots in both faces.
Size:...
£24.95
Thread Dial Indicator [MA1419_7N] Thread Dial Indicator [MA1419_7N]
low in stock! Sold
Thread Dial IndicatorMyford Part No.1419Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when...
£105
Faceplate Clamps [86_2] Faceplate Clamps [86_2]
low in stock! Sold
Myford Part No. 86
Set of 4 faceplate clamps
Length: 2 1/2"
They are suitable for clamping work not only to the faceplate but also to the cross slide a...
£9.95
Myford 7/32 Myford 7/32" Collet [MT27F32_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£20.95
Myford 5/16 Myford 5/16" Collet [MT25F16_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£17.95
Myford 3/8 Myford 3/8" Collet [MT23F8_1]
low in stock! Sold
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£22.95
Myford 3/8 Myford 3/8" Collet [MT23F8_2]
Myford 2 MT Collets fit directly into the spindle of all ML10, Speed 10, Diamond 10, ML7, ML7-R and Super 7 lathes, with spindle nose bored 2 MT and threaded 1....
£14.95
Myford Collet Nose Piece [MA1438_3U] Myford Collet Nose Piece [MA1438_3U]
low in stock! Sold
Myford Part No. 1438Collet Nose Piece enables Myford MT2 Collets (11445) to be fitted directly into the headstock spindleCondition: 9/10Application: ML7; ML-7R;...
£21.95