Centec Milling Machines
How to Order
Shipping & Dispatch
Keep up-to-date via e-mail!
ML7 - Page 4
Countershaft Pulley [CP7E_U]
Myford Part No: Countershaft PulleyThis is the early version which is retained on the countershaft by 2 grub screws - later versions used a Woodruff key and a s...
ML7 Headstock Assembly [HSA_1]
ML7 headstock assembly with all parts shown. Includes backgear cluster, bull wheel, drive pulley, spindle and bearings.
This whole assembly has had very litt...
Cone pulley [A3312_4U]
Countershaft cone pulleyMyford Part No: A3312Condition: 9/10Application: Super 7; ML7-RCategory: Used_Items ...
Series 7 Saddle Assembly [WGSA_3U]
Saddle Assembly to fit wide guide Series 7 lathes. Comes complete with front & rear saddle strips, gib strip, adjusting screws, eccentric clamp & fixing...
Change Gear Quadrant Assembly [CGQA_4]
Myford Part No. A4736Colour: Grey - originalCondition: 9/10Application: ML7; ML-7R; Super 7Category: Used_Items ...
Backgear Lever [74_1207_1_U2]
Backgear lever assemblyComprising the following Myford Part No's:74/1207/1 Backgear Lever; 75/1219 Plunger; A4728 Spring; 75/1220 Screwed Bush; Acorn Knob &...
Tumbler Sleeve Gear [75_1232_2_2U]
Myford 25 Tooth Tumbler Sleeve GearMyford Part No: 75/1232/2Condition: 9/10Application: ML7Category: Used_Items...
Tumbler Reverse Lever Assembly [ML7_TRLA_U]
Tumbler reverse lever assemblyComprising the following Myford Part No's:73/1208 Tumbler Reverse Lever; 75/1242 20T Gear; 75/1241 18T Gear; 75/1243 Gear Studs; L...
Leadscrew Bracket L.H. [74_1134_U]
L.H. Leadscrew Bracket AssemblyComprising the following Myford Part No's:74/1134 Leadscrew Bracket; A4725 StudsColour: Grey - needs paintingCondition: 9/10 - no...
Leadscrew Bracket R.H. [74_1135_U]
R.H. Leadscrew Bracket AssemblyMyford Part No: 74/1135Colour: GreyCondition: 8/10Application: ML7Category: Used_Items ...
Thread Dial Indicator [MA1419_6]
Myford Part No.1419 Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when the leadscrew half ...
Thread Dial Indicator [MA1419_7N]
Myford Part No.1419Fits to the right hand side of the apron by means of a stud inserted in the tapped hole provided. Graduated to show when the leadscrew half n...
Leadscrew Guard [A4188_1_N]
Leadscrew GuardMyford Part No: A4188/1Colour: Green - poor paintCondition: Unused Beeston factory stockApplication: ML7; Super 7; ML-7RCategory: New_Item ...
Leadscrew Guard - Short [LSG_1U]
Leadscrew Guard - this guard is 25mm shorter than standard and is for use on lathes fitted with a gearbox where maximum saddle travel is required.Colour: GreenC...
Motor Pulley 2 1/2" [MDP2_1F2]
Motor Drive PulleyThis is the optional larger diameter motor pulley to obtain faster spindle speeds on an ML7 lathe.It is a cast iron Beeston Factory item with ...
Back Gear Key [75_1227_2]
Myford Back Gear KeyMyford Part No: 75/1227Condition: 9/10 to 10/10Application: ML7Category: Used_Items...