Centec Milling Machines
How to Order
Shipping & Dispatch
Keep up-to-date via e-mail!
Myford ML7R with clutch
Please see the attached file for details
Additional photographs can be viewed by following this link ML7R Lathe For Sale
ML7 Headstock Drive Belt [ML7HDB]
Standard Vee-Belt which drives from the 3-step pulley on the countershaft to the headstock spindle drive pulley.This belt is also suitable for ML7 lathes fitted...
Super 7 / ML7R Headstock Drive Belt [S7HDB]
Standard Vee-Belt which drives from the 4-step pulley on the countershaft to the headstock spindle drive pulley.High quality belt from a major supplierApplicati...
Super 7 / ML7R Motor Drive Belt [S7MDB]
Standard Vee-Belt which drives from the 2-step pulley on the motor to the countershaft drive pulley.High quality belt from a major supplierApplication: Super 7;...
ML7 Motor Drive Belt [ML7MDB]
Standard Vee-Belt which drives from the motor pulley to the countershaft drive pulley.High quality belt from a major supplierApplication: ML7; ML7 Tri-LevaCateg...
Adjusting Screws [A2123]
Myford Part No: A2123Screws that fit into the countershaft to adjust the headstock belt tensionQuantity: pack of 2Condition: NewApplication: ML7; ML-7R; Super 7...
Thrust Collar - Leadscrew [Stk. No. 75-1115-1]
Myford Part No: 75/1115/1Thrust collar which fits on the leadscrew to bear against the R.H leadscrew support bracketCondition: NewApplication: ML7; ML-7R; Super...
3/8" BSF Simmonds Nuts [3F8BSFNKP]
Locking nuts to fit the tailstock clamping stud and to secure the tailstock handwheel
Thread: 3/8" B.S.F
Finish: Bright zinc plate
Unit Quantity: Pack ...
7/16" BSF Simmonds Nut [7F16BSFNKP]
Locking nut used at the R.H end of the leadscrew
Fastener Type: Locking nut
Locking Method: Nylon insert
Thread: 7/16" B.S.F
Finish: Bright zinc pla...
24 Tooth Gear [Stk. No. A3115]
Myford Part No: A311524 tooth gear which fits to the tumbler sleeve gear on lathes fitted with a quick change gearboxCondition: NewApplication: ML7; ML-7R; Supe...
2 BA Oil Nipple [33/072]
Replacement oil nipples used throughout Myford lathesFlat front face and spherical rear form permits use with all types of push fit oil guns These nipples have ...
Woodruff Keys [404WK]
Myford reference: Woodruf Key No. 404Used throughout Myford lathesSize: ½" x ⅛"Quantity: Pack of 5Application: ML7; ML-7R; ML10; Super 7Category: New_Item...
Gear Cover Assembly [75/1340]
Myford Part No: 73/1340Gear cover assembly for lathes fitted with aluminium alloy apron and 5/8" diameter leadscrew.Fitted with new Oilite bushCondition: 9/10Ap...
Tumbler Reverse Stud [75/1222]
Myford Part No: 75/1222Tumbler reverse studCondition: 10/10Application: ML7Category: New old stock (N.O.S)...
Screwed Bush [75/1220]
Myford Part No: 75/1220 Screwed bush which fits into the tumbler reverse and backgear levers to retain the plungersCondition: New Application: ML7; ML-7R; Super...
Pinion Bush - Long [AABL]
Pinion bush for ML7 lathes fitted with die-cast aluminium apron
Used on all ML7 lathes up to and including serial number K111726 on aprons fitted with the ge...