Long Cross-slide [1467_3]
Myford Part No. 1467
The long cross-slide is 1 5/8" longer than the standard and has an extra tee slot. The use of this slide leaves ample space for the workpiece between the front and rear tools when using a rear tool post.
The travel of the cross-slide can be increased to 7" by fitting extra long feed screw A3239 (Imp. 10 tpi) or A7822 (Metric 2mm).
The slide comes with the gib strip and adjusting screws
This slide is the one Myford sold as an accessory for the ML7 - it is interchangeable with the later slide (A1513/1) which was fitted to ML7R lathes
Condition: Superficial marks only and virtually no wear
Application: ML7; ML-7R